Title: Cannot enable or disable interface or POE status on SNC [Print this page] Author: Oscar Time: 2018-7-11 15:38 Title: Cannot enable or disable interface or POE status on SNC While configuring devices on SNC batch setting view (Device->Configuring Devices->In batch setting), it prompts error "Writing SNMP failed, The system error information is [No access]."
Solution:
1.Verify whether the SNMP community writing permission is configured on device.
Ruijie(config)#snmp-server community ruijie rw
2.Ensure the SNMP template on SNC is configured correctly.
