Ruijie Community
Title: mesh connection [Print this page]
Author: diegorg@proacti Time: 2024-2-7 04:28
Title: mesh connection
connect a UFO AP model RAP6262(G) with my EG105GW(T) router via mesh and from one moment to the next it goes offline, I have restored it, I connect it, the process begins and then it goes offline
Author: v-anakaren@ruij Time: 2024-2-7 06:05
Dear,
Good day.
The connection between these devices via mesh is not possible, the AP cannot mesh with the EG, but it can mesh with other APs of the same series.
Best regards
Author: v-anakaren@ruij Time: 2024-2-7 06:24
Dear,
have reviewed, and the mesh connection between these devices is possible. If it cannot be established, you need to check the firmware version of the AP.
Best regards
Author: diegorg@proacti Time: 2024-2-7 06:50
Edited by Diego Restrepo at 2024-2-7 07:00
AnaKarenDuranUrrutia replied at 2024-2-7 06:24
Dear,
have reviewed, and the mesh connection between these devices is possible. If it cannot be e ...
It worked yesterday for a while but then it stopped working, the version of both devices is 2.62.0.2404
I factory reset the AP and then I rescan the ACCESS POINT MESH, it finds the device, it starts to adopt it and then it shows that it is offline, I am doing this procedure 2 meters from the GW
| Welcome to Ruijie Community (https://community.ruijienetworks.com/) |
Powered by Discuz! X3.2 |