Ruijie Community

Title: switch config status failed [Print this page]

Author: wdk@tiscali.co. Time: 2024-2-18 18:12
Title: switch config status failed
Good day,

Good afternoon, why did the config status fail? kindly assist.

Author: yangyue1@ruijie Time: 2024-2-19 09:34
plz click "fail" under sync status in device list and manually sync all parts shows red words

Author: nantachai.c@gma Time: 2024-11-25 17:38

GTAC-Stella replied at 2024-2-19 09:34
plz click "fail" under sync status in device list and manually sync all parts shows red words

I also have the same problem with ES220GS-P model. Waiting for any suggestion.

Thanks,

Author: nantachai.c@gma Time: 2024-11-26 20:57

Nantachai Chaiwatee replied at 2024-11-25 17:38
I also have the same problem with ES220GS-P model. Waiting for any suggestion.

I have done this step several times but the result is the same.

Best Regards,

Author: wangyanjun3@rui Time: 2024-11-26 21:03

Nantachai Chaiwatee replied at 2024-11-26 20:57
I have done this step several times but the result is the same.

Best Regards,

Dear customer
for this issue there have this reason
1. Maybe the network is slowly will lead to this issue.
2. Another reason is synchronization exception，you can try reset this switch.
Best regards
Tom

Author: nantachai.c@gma Time: 2024-12-5 14:59

GTAC-Tom replied at 2024-11-26 21:03
Dear customer
for this issue there have this reason
1. Maybe the network is slowly will lead to ...

Dear Tom,
Thank you very much for your help.
I have reset the switch and the result is the same as the picture attached below.
Please give me some advice.

Best Regards,
Nantachai

Welcome to Ruijie Community (https://community.ruijienetworks.com/)