Title: RG-AP630 with 2 external antenna [Print this page] Author: Oscar Time: 2018-8-22 11:38 Title: RG-AP630 with 2 external antenna Solution:
By default, RG-AP630 is running in full capacity of spatial streams, likes RG-AP630(IDA) is 3x3 spatial streams. If you only have 2 external antenna, it requires to downgrade spatial streams and MCS.
For 2x2 external antenna setting on controller as follow:
Spatial Streams
AC(config)#ap-config ap630
AC(config-ap)#antenna transmit 3 radio 1
AC(config-ap)#antenna receive 3 radio 1
AC(config-ap)#antenna transmit 3 radio 2
AC(config-ap)#antenna receive 3 radio 2
MCS
AC(config-ap)#802.11n mcs support 15 radio 1
AC(config-ap)#802.11n mcs support 15 radio 2
AC(config-ap)#802.11ac mcs support 19
For 1x1 external antenna setting on controller as follow:
Spatial Streams
AC(config)#ap-config ap630
AC(config-ap)#antenna transmit 1 radio 1
AC(config-ap)#antenna receive 1 radio 1
AC(config-ap)#antenna transmit 1 radio 2
AC(config-ap)#antenna receive 1 radio 2
MCS
AC(config-ap)#802.11n mcs support 7 radio 1
AC(config-ap)#802.11n mcs support 7 radio 2
AC(config-ap)#802.11ac mcs support 9
Notes: External antenna must be connected in sequence, you can find sequence number on RG-AP630 connector.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)