Title: How to do if Reyee EW Router start failed in Relay/mesh Wi-Fi mode? [Print this page] Author: GTAC-Sophia Time: 2024-3-3 13:01 Title: How to do if Reyee EW Router start failed in Relay/mesh Wi-Fi mode? Overview
Reyee EW Router has four modes to choose from atthe beginning (router mode, relay mode, Mesh wifi, WISP), and two modes(EWEB/APP).
Keywords EW Router,opening, configuration, SSID , Internet Relay/Mesh Wi-Fi mode failure phenomenon
Issue Description
Unable to connect to the main router in relay mode Issue Analysis
Is the mode of the relay router correct?
Login to this relay router, can you scan the mainrouter's ssid
In the case of pressing the Mesh button fornetworking, has the main router pressed the Mesh button?
Check the distance between the two routers if theyare connected wirelessly in relay mode
In wired scenarios , whether the two ports areconnected correctly Solution
Confirm that the relay router is in relay mode
② Make this relay router within 2 meters of themain router
③ The relay router joins the main router in theform of scanning wifi; or after the relay router is successfully powered on, itautomatically connects to nearby relay routers by pressing the Mesh button onthe main router
④ In wired scenarios , the main router is connectedto the LAN port, and the relay router is connected to the WAN port
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
