Ruijie Community

Title: How to configure OSPF on Reyee EG? [Print this page]

Author: GTAC-Sophia Time: 2024-3-11 17:59
Title: How to configure OSPF on Reyee EG?
IPv4 uses OSPF v2, and IPv6uses OSPF v3.
1. OSPF V2
Step 1: Open eweb locally or via cloud

Step 2: Configure OSPFv2 Basic Parameters
Choose One Device Gateway C onfig Advanced >Routing > OSPFV2 , click Start Setup , and then configure an instance and an interfacerespectively.

Configure basic parameters for an instance.

Click Details to display detailed configurations.

Configure basic parameters for an OSPFv2 interface.

Click Details to display detailed configurations.

Click Add to add an interface to interface List

Click Finish

After you create an instance and an interface,choose One Device > Gateway > Advanced > Routing > OSPFV2
to check the current Instance List

Step 3: Add an OSPFv2 Interface
Choose One Device Gateway C onfig Advanced >Routing > OSPFV2 , select the instance to be configured in Instance List , and choose More >V2 Interface.

Step 4: Redistribute OSPFv2 Instance Routes
Choose One Device Gateway C onfig Advanced >Routing > OSPFV2 , select the instance to be configured in Instance List , and choose More >V2 Instance Route Redistribution
PS: The instance ID cannot be selected for routeredistribution.

Step 5: Manage OSPFv2 Neighbors

Choose One Device Gateway C onfig Advanced >Routing > OSPFV2 , select the instance to be configured in Instance List , and choose More V2Neighbor Management

Step 6: View OSPFv2 Neighbor Information
Choose One Device > Gateway C onfig >Advanced > Routing > OSPFV2 , select the instance to be configured in Instance List , and click Neighbor Info

2. OSPF V3
Step 1: Open eweb locally or via cloud

Step 2: Configure OSPFv3 Basic Parameters
Choose One Device > Gateway C onfig Advanced> Routing > OSPFV3 , click Start Setup , and then configure an instance and an interfacerespectively.

Configure basic parameters for an instance.

Click Details to display detailed configurations.

Configure basic parameters for an OSPFv3 interface.

Click Details to display detailed configurations.

Click Add to add an interface to interface List

Click Finish.

After you complete configuration, choose One DeviceGateway > C onfig > Advanced > Routing > OSPFV3 to check Instance List

Step 3: Add an OSPFv3 Interface
Choose One Device Gateway C onfig Advanced >Routing > OSPFV3 , select th e instance to be configured in Instance List , and choose More V3 Interface

Step 4: View OSPFv3 Neighbor Information
Choose One Device Gateway C onfig > AdvancedRouting > OSPFV3 , select the instance to be configured in Instance List , and click NeighborInfo

Author: NTAC-Jack Time: 2024-10-8 15:44
你的讲解对我很有帮助

Welcome to Ruijie Community (https://community.ruijienetworks.com/)

Ruijie Community

Step 2: Configure OSPFv3 Basic Parameters Choose One Device > Gateway C onfig Advanced> Routing > OSPFV3 , click Start Setup , and then configure an instance and an interfacerespectively.

Configure basic parameters for an instance. Click Details to display detailed configurations. Configure basic parameters for an OSPFv3 interface.

Click Details to display detailed configurations. Click Add to add an interface to interface List

Click Finish. After you complete configuration, choose One DeviceGateway > C onfig > Advanced > Routing > OSPFV3 to check Instance List