Ruijie Community

Title: How to configure the Link Detection for wan port on Reyee EG? [Print this page]

Author: GTAC-Sophia Time: 2024-3-12 09:17
Title: How to configure the Link Detection for wan port on Reyee EG?
The system supports IPv4 and IPv6 WAN linkdetection , which can be enabled separately.

1. Open eweb locally or via cloud

2. Choose One-Device >Gateway > Config > Network > WAN > Line Detection

3. Configure WAN Link Detection

3.1 Configure IPv4 WAN Link Detection

Step 1: On the IPv4 WAN Link Detection page, toggleon Enable to enable IPv4 WAN linkdetection.

Step 2: In the WAN port list, select a WAN port forlink detection, and click Edit

Step 3: Configure theparameters of the link detection function. Then click OK to save

3.2 Configure IPv6 WAN Link Detection

Step 1: On the IPv6 WAN Link Detection page, toggleon Enable to enable IPv4 WAN link detection.

Step 2: In the WAN port list, select a WAN port forlink detection , and click Edit

Step 3: Configure the parameters of the linkdetection function. Then clock OK to save.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)