Ruijie Community

Title: Automatically switch from LAN to WLAN [Print this page]

Author: lukasz@satworld Time: 2024-3-14 20:28
Title: Automatically switch from LAN to WLAN
I have to APs connected into 2 switches in same network. Switches are in place A and B linked by cable.
2 APs connected into different switches but in same network. I would like to turn on option for automatic change from LAN to WLAN uplink when cable between switches will be broken or unplugged. So after unplug cables between switches, offline AP will connect up to other AP which is online and keep other part network up and running until service man come.

Author: guominxiang@rui Time: 2024-3-14 22:26
You need enable Mesh function first:

Then you need enable this Self-Healing Mesh function

When the wired is not available but the AP still has power, the AP can mesh to other APs and access internet via wireless

Author: lukasz@satworld Time: 2024-3-14 23:15

GTAC-Micca replied at 2024-3-14 22:26
You need enable Mesh function first:

Then you need enable this Self-Healing Mesh function

AP Mesh is Enable, where is Self-Healing Mesh function ?

Author: javier@ruijie.c Time: 2024-3-15 09:04

Lukasz Ptak replied at 2024-3-14 23:15
AP Mesh is Enable, where is Self-Healing Mesh function ?

Hi:

You can find the Self-Healing Mesh function on the interface of the AP:

Regards,

Javier

Welcome to Ruijie Community (https://community.ruijienetworks.com/)