Title: I can't not configure channel at Ruijie 840 Aps [Print this page] Author: waiyanmoe1500@g Time: 2024-3-18 17:02 Title: I can't not configure channel at Ruijie 840 Aps How can i fix that issue and i am facing that issue both Ruijie 840 and 730 model.
Author: liujunhui1@ruij Time: 2024-3-18 19:37
Dear sir
May i know if you configure radio of APs on the sub-project
if so, this is existing issue with Cloud and R&D still working on it
but we can configure radio settings on the web interface of the AP
or configure radio setting via commands:
Ruijie#configure terminal
Ruijie(config)#interface dot11radio 1/0
---->2.4G
Ruijie(config-if-Dot11radio 1/0)#channel 6
Ruijie(config-if-Dot11radio 1/0)#exit
Ruijie(config)#interface dot11radio 2/0
---->5G
Ruijie(config-if-Dot11radio 2/0)#channel 153
Ruijie(config-if-Dot11radio 2/0)#end
Ruijie#write
Ruijie#configure terminal
Ruijie(config)#interface dot11radio 1/0 --->2.4G
Ruijie(config-if-Dot11radio 1/0)#power local 50 -----> Adjust the transmit power to 50%.
Ruijie(config-if-Dot11radio 1/0)#end
Ruijie#write
Ruijie#configure terminal
Ruijie(config)#interface dot11radio 2/0 --->5G
Ruijie(config-if-Dot11radio 1/0)#power local 50 -----> Adjust the transmit power to 50%.
Ruijie(config-if-Dot11radio 1/0)#end
Ruijie#write
Best regards,
Ross
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
