Ruijie Community
Title: Speed Limit RAP2260 (E) [Print this page]
Author: wallnas Time: 2024-5-3 20:22
Title: Speed Limit RAP2260 (E)
I configured a speed limit on cloud :
Device Config, SSID, Edit , Advanced, Single-Client Speed Limit:
but it doesn't work, the speed is always the same as if I hadn't done anything: how can I solve it?
Author: yangyue1@ruijie Time: 2024-5-3 20:26
Hello sir,
1. plz check if the ap has been upgraded to the latest firmware version, if it is not, plz upgrade.
2. plz check the ap sync status and make sure it is fully synced
Author: software@novert Time: 2024-5-3 21:02
Hi ,
Firmware is at latest version:
ReyeeOS 2.260.0.1329 Latest
|
Status Config: Synced
Author: liujunhui1@ruij Time: 2024-5-6 15:21
Dear sir
If rate limit still can not take affect
could you share the network with us via this email:liujunhui1@ruijie.com.cn
so we can check further for you
Best regards,
Ross
Author: software@novert Time: 2024-5-6 23:52
GTAC-Ross replied at 2024-5-6 15:21
Dear sir
If rate limit still can not take affect
Resolved
Disable
Disabilitare
Single-Client Speed Limit da SSID (Device Config, Wireless, SSID, Edit single SSID
Enable
Device Config, Wireless, Rate Limit, Wireless
Author: ferdianrsidiq@g Time: 2024-5-27 14:09
still not working for me
Author: wengjialong@rui Time: 2024-5-27 14:14
Hi, Ferdian Sidiq
If you are using EG105GW(T) in Router mode, please log into its eWeb and configure Custome Policies of Flow Control to limit the speed of network users, you may refer to section 6.6.3 on page 205 of the following guide:
https://reyee.ruijie.com/en-global/resources/preview/rg-eg-w-web-based-configuration-guide
Best regards,
Jayden
| Welcome to Ruijie Community (https://community.ruijienetworks.com/) |
Powered by Discuz! X3.2 |