Ruijie Community

Title: Site2Site vpn using private ip [Print this page]

Author: nbctcp@gmail.co Time: 2024-5-15 19:36
Title: Site2Site vpn using private ip
INFO:
HQ>ISP1 modem>private ip>Reyee 105GW>LAN
BRANCH>ISP2 modem>private ip>Reyee 105GW>LAN

I want to connect both sites as LAN bridge. similar to EOIP I believe

?
1. is that doable using Reyee and private ip
2. if yes what doc should I follow
tq

Author: liujunhui1@ruij Time: 2024-5-15 19:50
Dear sir

If you want to configure VPN via site to site you can refer to this link:
https://reyee.ruijie.com/en-global/support/documents/slide_ruijie-reyee-rg-eg-series-routers-implementation-cookbook#_Toc162625891

and it will need public ip address or you will need to ask ISP configure port mapping on the uplink device

Best regards,
Ross

Author: nbctcp@gmail.co Time: 2024-5-15 19:57

GTAC-Ross replied at 2024-5-15 19:50
Dear sir

If you want to configure VPN via site to site you can refer to this link:

that link didn't mention about public/private/cloud ip
I believe HQ site or both sites using public ip
what I want exactly like zerotier

Author: liujunhui1@ruij Time: 2024-5-20 10:04

nbctcp bun replied at 2024-5-15 19:57
that link didn't mention about public/private/cloud ip
I believe HQ site or both sites using publi ...

Dear sir

If two ends have obtained the public ip address, you can refer to this link to configure VPN site to site
https://reyee.ruijie.com/en-global/support/documents/slide_ruijie-reyee-rg-eg-series-routers-implementation-cookbook#_Toc162625891

Best regards,
Ross

Author: nbctcp@gmail.co Time: 2024-5-20 12:35

GTAC-Ross replied at 2024-5-20 10:04
Dear sir

1. only 1 site has public ip not 2 sites
2. preferably like zerotier which both sites no need public ip

Welcome to Ruijie Community (https://community.ruijienetworks.com/)