Title: How to do if the folw control on Reyee EG doesn't work? [Print this page] Author: zhangqiao@ruiji Time: 2024-5-24 15:35 Title: How to do if the folw control on Reyee EG doesn't work? 1. Enter the eweb of Reyee EG
2. Select Gateway > Behavior > Flow control
3. Click Edit to check therelated flow control policy entry
4. Check if the user group is selected correctly
5. Compare the Application and Bandwidth types are configured according to design
6. Check if the interface should be applied on all WAN ports
Note: If you select All WAN Port here, the speed test result will be the limit multiplied by the number of WAN ports. For example, the bandwidth limit is 10Mbps, and there are two WAN ports, then the speed test result will be 20Mbps approximately.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
