Ruijie Community

Title: Reyee Cloud Gateway router - 3CX Cloud to internal VOIP phones fail to register [Print this page]

Author: jacques@aquilat Time: 2024-5-31 02:25
Title: Reyee Cloud Gateway router - 3CX Cloud to internal VOIP phones fail to register
Hello Support

My VOIP phones fail to register, I think Reyee Cloud Gateway router is block ports. I want to open all the ports for 3CX on Reyee Cloud Gateway router to IP Range, How do I do it? And no VOIP traffic must be blocked

Router: EG310GH-E

Author: jacques@aquilat Time: 2024-5-31 03:02
Test on a external internet connection LTE - working.. This means Reyee Cloud Router is blocking 3CX traffic, how do I fix this problem. I tried SIP ALG, doesnt work

Author: v-anakaren@ruij Time: 2024-5-31 06:17

Jacques Rossouw replied at 2024-5-31 03:02
Test on a external internet connection LTE - working.. This means Reyee Cloud Router is blocking 3CX ...

Dear,
Good day,
A router cannot block ports. On the router, ports can be enabled by performing port mapping. It is necessary to verify that if there is a firewall in the network, it is not blocking the ports. Could you tell me what firmware version the router has?
Thanks

Best regards.
Karen

Author: jacques@aquilat Time: 2024-5-31 16:08

AnaKarenDuranUrrutia replied at 2024-5-31 06:17
Dear,
Good day,
A router cannot block ports. On the router, ports can be enabled by performing p ...

Current Version ReyeeOS 2.280.0.1620 (Latest version)

No firewalls. Reyee Cloud Router is the Firewall\Router....

Author: jacques@aquilat Time: 2024-5-31 17:05

Jacques Rossouw replied at 2024-5-31 16:08
Current Version ReyeeOS 2.280.0.1620 (Latest version)

No firewalls. Reyee Cloud Router is the Fir ...

Here is what happening

1. Existing VOIP phones register on 3cx Cloud and can make calls, new phones dont want to register on 3cx cloud
2. When I switch on SIP ALG I can register new Phones on 3cx cloud and make calls but existing phones not registered and cant make calls
3. Did test phone on my LTE router working 100%

Author: m.polainer@trio Time: 2024-5-31 18:16

Jacques Rossouw replied at 2024-5-31 17:05
Here is what happening

1. Existing VOIP phones register on 3cx Cloud and can make calls, new phon ...

Make sure your LTE Router is in Passthrough Mode and your Reyee Gateway has a public WAN address. SIP does not play nicely with NAT and if you have double NAT you definitely will run into serious issues.

Author: guominxiang@rui Time: 2024-5-31 18:32

Jacques Rossouw replied at 2024-5-31 17:05
Here is what happening

1. Existing VOIP phones register on 3cx Cloud and can make calls, new phon ...

Hello,

Can I confirm if the protocol is the same for the old and new phones? And is the software version the same?
What happens if you delete the old phone and add it again after SIP ALG is enabled?
You can test it first, if there are still problems, please feel free to contact me. I'd be happy to help you in the community.

Author: jacques@aquilat Time: 2024-5-31 18:53

poli5681 replied at 2024-5-31 18:16
Make sure your LTE Router is in Passthrough Mode and your Reyee Gateway has a public WAN address. ...

LTE VOIP Phones work 100%
Reyee Router VOIP problem

Author: jacques@aquilat Time: 2024-5-31 19:25

Jacques Rossouw replied at 2024-5-31 18:53
LTE VOIP Phones work 100%
Reyee Router VOIP problem

Testing 2 phones when I switch on SIP ALG phones register and can phone. But when I switch off SIP ALG phones dont want to register

Author: m.polainer@trio Time: 2024-5-31 21:43

Jacques Rossouw replied at 2024-5-31 18:53
LTE VOIP Phones work 100%
Reyee Router VOIP problem

Exactly. If i assume your LTE Device is setup as a NAT router. 1x NAT can be bypassed with e.g. STUN or ALG.
But given your LTE Router is doing NAT and EG does it as well, 3CX is behind 2 NATs now.
This is why registering failes (without ALG), because 3CX compares registration address with request IP.
ALG will fix that, but can´t for the 2nd NAT; meaning you might be able to register, but unfortunately will still have issues (one way audio or unability to call).
Fix should be easy to change LTE Router to passthrough and use Reyee EG as your router.
Good luck.

Author: jacques@aquilat Time: 2024-6-1 23:54

poli5681 replied at 2024-5-31 21:43
Exactly. If i assume your LTE Device is setup as a NAT router. 1x NAT can be bypassed with e.g. ST ...

Dont think you understand

1. Reyee Gateway Router connected to Fibre- VOIP 3CX fails to register and make calls
2. LTE router connected to VOIP is at my home - VOIP 3CX register and can make calls

Author: yangyue1@ruijie Time: 2024-6-24 14:11

Jacques Rossouw replied at 2024-6-24 14:06
I have resolved the problem. On Yealink phones I have changed times to register and keep alive to ...

OK sir, plz do not hesitate to reach us when you have any recommendation or problem to ask.

Author: jacques@aquilat Time: 2024-7-2 14:35

GTAC-Stella replied at 2024-6-24 14:11
OK sir, plz do not hesitate to reach us when you have any recommendation or problem to ask.

Nope all new phones don't want to register, how do I allow all 3CX ports on Cloud Gateway router?

Author: wengjialong@rui Time: 2024-7-2 15:15

Jacques Rossouw replied at 2024-7-2 14:35
Nope all new phones don't want to register, how do I allow all 3CX ports on Cloud Gateway router?
...

Hi, Jacques Rossouw

Please kindly note that the router does not have the ability to block ports.
May I please know if any error prompts or logs on the 3cx Cloud could indicate why the registration failed?
If you suspect the ports are blocked on your public IP, please verify this with the ISP.

Best regards,
Jayden

Welcome to Ruijie Community (https://community.ruijienetworks.com/)