Ruijie Community

Title: VLAN Problem - Port with VLAN Native/Access can`t be accessed from UPlink - ReyeeOS 2.280.0.1713 [Print this page]

Author: villapuncak2024    Time: 2024-6-4 20:15
Title: VLAN Problem - Port with VLAN Native/Access can`t be accessed from UPlink - ReyeeOS 2.280.0.1713
Dear Ruijie. We Use switch PoE RG-ES218GC-P, We use Port 17 as Trunk to our uplink.

And port 7-10 as trunk to our Access Point in RG-RAP2200(E). RG-RAP2200(E) use to wifi and two ssid (two vlan too, Vlan 30 & Vlan 50).

So We Set port 7-10 in our RG-ES218GC-P as Trunk for VLAN 30-50 with native/access port vlan 30. It works before we upgrade our Access Point to ReyeeOS 2.280.0.1713, we try to downgrade but it still not work.

From Uplink we can`t ping access point in port 7-10. Can I have solutions for these problems.

We Use AP RG-RAP2200(E) & RG-1200(F) with firmware ReyeeOS 2.280.0.1713 (we have downgraded too but same result). We Use Switch RG-ES218GC-P with firmware ESW_1.0(1)B1P27,Release(11131015).



with original firmware ReyeeOS 1.55.1914 from factory it works, but i seem can`t find where to download it.

Author: chenchunyan@rui    Time: 2024-6-4 20:19
Hi EKO Arisanto,
Generally firmware version does not affect the vlan tag settings.
Please make sure that the ports connected to RAP are trunk ports, and allow vlan1, vlan of AP and also vlan of wireless users.

Author: villapuncak2024    Time: 2024-6-4 20:21
GTAC-Vivian replied at 2024-6-4 20:19
Hi EKO Arisanto,
Generally firmware version does not affect the vlan tag settings.
Please make sure  ...

Thnx For Fast Respon, We don`t want vlan1 as native in Ports that connected to RAP. Can We Do it ? It wont work with these firmware.

We can do it with firmware ReyeeOS 1.55.1914, where can we download it ?

Thnx in Advanced


Author: chenchunyan@rui    Time: 2024-6-4 20:29
EKo Arisanto replied at 2024-6-4 20:21
Thnx For Fast Respon, We don`t want vlan1 as native in Ports that connected to RAP. Can We Do it ? ...
Hi EKO Arisanto,
If you don't need native vlan1, you can set it as other vlan id.
Please remeber to allow it and the vlan of wireless users.
Regarding the old firmware, we don't advised to downgrade the version because old version may cause errors and bugs. It is advised to check the configuration first. If the configuration is correct while you still cannot get internet on AP. Please share project with me via email: service_rj@ruijienetworks.com
This is the guide on how to share: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=1751&extra=page%3D1

Author: villapuncak2024    Time: 2024-6-4 20:36
GTAC-Vivian replied at 2024-6-4 20:29
EKo Arisanto replied at 2024-6-4 20:21
Thnx For Fast Respon, We don`t want vlan1 as native in Ports  ...

We have already set it to other vlan ID than Vlan 1, it still won`t work, it only works if I Use VLAN 1 as native VLAN.

We ping RAP from Mikrotik with Vlan 30. It works with old firmware

Author: chenchunyan@rui    Time: 2024-6-4 20:41
Edited by GTAC-Vivian at 2024-6-4 22:57

EKo Arisanto replied at 2024-6-4 20:36
We have already set it to other vlan ID than Vlan 1, it still won`t work, it only works if I Use V ...
Hi EKO Arisanto,
Please share project with me via email:
service_rj@ruijienetworks.com

This is the guide on how to share:
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=1751&extra=page%3D1

Author: villapuncak2024    Time: 2024-6-4 22:53
GTAC-Vivian replied at 2024-6-4 20:41
Hi EKO Arisanto,

Can you give me your email please

Author: wengjialong@rui    Time: 2024-6-4 22:57
EKo Arisanto replied at 2024-6-4 22:53
Can you give me your email please

Hi, EKo Arisanto

Please share the project to service_rj@ruijienetworks.com.

Best regards,
Jayden

Author: villapuncak2024    Time: 2024-6-4 23:05
GTAC-Jayden replied at 2024-6-4 22:57
Hi, EKo Arisanto

Please share the project to .

I have share this project via email. Thnx.

Author: villapuncak2024    Time: 2024-6-5 12:53
EKo Arisanto replied at 2024-6-4 23:05
I have share this project via email. Thnx.

Any solutions guys about these vlan problems?

Author: chenchunyan@rui    Time: 2024-6-5 13:08
EKo Arisanto replied at 2024-6-5 12:53
Any solutions guys about these vlan problems?

Hi EKO Arisanto,



I have received your email and responded to you. Please check the email and continue to check this issue with me. Thank you






Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2