Title: Which WiFi channels should I use for Mesh [Print this page] Author: ewwink@yahoo.co Time: 2024-6-8 06:52 Title: Which WiFi channels should I use for Mesh I have 3 RG-EW device with wired connection, I read that for normal WIFI AP I should use channel 1, 6, 11 to reduce the interference.
But for Mesh,
Which WiFi channels should I use, same channel or different like above? Author: ewwink@yahoo.co Time: 2024-6-11 01:56
OK I will answer my own question 😁
from what I've read, Mesh is a system for Wireless, so if using Wired its not Mesh.
But using wired we can still use "Fast Roaming" which is the main feature of the Mesh. Which WiFi channels should I use for wired mesh?
for wired connection it free to select any channel because it not used for mesh. And for higher signal and bandwidth use different channel
Dear,
Your configuration is correct. However, when the devices are connected through mesh, the configuration is done automatically. Usually, when you check, you will see that the channels are set to auto. I
t is only recommended to change them when there are coverage issues, interference, or speed problems.
Best regards,
Karen
Welcome to Ruijie Community (https://community.ruijienetworks.com/)