Ruijie Community

Title: VLAN [Print this page]

Author: kcl@igold.com.p Time: 2024-6-13 07:57
Title: VLAN
Hi, after setting up 2 VLAN, can the 2 VLAN still access each other?

Author: javier@ruijie.c Time: 2024-6-13 08:49
Hi:

If you want to communicate 2 VLANs, you need a router or L3 switch to make them communicate each other, since the data traffic of each network segment is forwarded using these devices.

May I know if you have a gateway or router for this scenario?

Thanks.

Regards,

Javier

Author: kcl@igold.com.p Time: 2024-6-13 08:59

GTAC--Javier replied at 2024-6-13 08:49
Hi:

If you want to communicate 2 VLANs, you need a router or L3 switch to make them communicate eac ...

I Have a third party router, i don"t know if it can still communicate with each other.

Author: taizhaolong@rui Time: 2024-6-13 09:27

Kevin Bryan Laurea replied at 2024-6-13 08:59
I Have a third party router, i don"t know if it can still communicate with each other.

Hi,

We'd like you provide us a topology of the network so we can better help you check, if both the vlan's gateway ip addresses are configured on the same 3rd party router, they should be able to access each other too.

RD,
David

Author: kcl@igold.com.p Time: 2024-6-18 06:52

GTAC-David replied at 2024-6-13 09:27
Hi,

We'd like you provide us a topology of the network so we can better help you check, if both t ...

Thanks for the answer

Welcome to Ruijie Community (https://community.ruijienetworks.com/)