Ruijie Community

Title: 4way handshake fail, maybe password not correct. problem [Print this page]

Author: ikisla1818@gmai Time: 2024-7-3 20:55
Title: 4way handshake fail, maybe password not correct. problem
Hi
I have RG-WS6009 wireless controller and 7 pieces AP840-L.

I set up the system and set the wireless passwords with ppsk, but the clients first connect, but then they automatically disconnect and do not connect for a while. Then it connects automatically.

The logs write:

*Jul 3 15:15:29: %RSNA-6-DISCONNECT: Client(xxxxx.xxx.xxxx) 4way handshake fail, maybe password not correct.

Author: chenchunyan@rui Time: 2024-7-4 22:03
Edited by GTAC-Vivian at 2024-7-4 22:05

Hi ismail kisla,
May I know if you are using the latest firmware version of AC? And may I know if your model is WS6008?
If yes, please upgrade it to the latest version. You can download the version file here: Ruijie RG-WS6008&6108 Wireless Controller Firmware - Ruijie Networks
If the issue persists after upgrade, please contact us via service_rj@ruijienetworks.com.

Author: ikisla1818@gmai Time: 2024-7-4 22:22

GTAC-Vivian replied at 2024-7-4 22:03
Hi ismail kisla,
May I know if you are using the latest firmware version of AC? And may I know if yo ...

Hi
Thanks for reply. I use lastest version of firmware .

Location:  AC_LOCATION
Firmware Version:  AC_RGOS 11.9(6)W3B1, Release(11160200)
Hardware Version:  1.60
WEB Version:  WLANWEB 11.9(6)W3B1, Release(11160200)
Booted on:  2024-07-02 00:09:42
Patch Version： --

Author: liuxiyang@ruiji Time: 2024-7-8 14:24

ismail kisla replied at 2024-7-4 22:22
Hi
Thanks for reply. I use lastest version of firmware .

Hi sir,

May I know your AP's model? If it is not up to date, you are advised to upgrade to the latest version.

Best regards,
Steve

Welcome to Ruijie Community (https://community.ruijienetworks.com/)