Ruijie Community

Title: AP Mesh on 2,4 Ghz [Print this page]

Author: grzegorz.jablon    Time: 2024-7-19 18:54
Title: AP Mesh on 2,4 Ghz
Hi, can I set up a Mesh connection between two accespoints in the 2.4 ghz band. Because according to the cloud it is 5ghz and the range of this network is quite weak and after a reset the device often has problems to re-establish the connection.


Author: v-xiewenyu@ruij    Time: 2024-7-19 21:50
Dear Grzegorz,

In this case, you may choose to use the relay mode for networking, then you can choose the standby device to use the 2.4GHz band for networking.


Best regards,
Lex





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2