Title: Grouping ip address [Print this page] Author: jovert@wintoppn Time: 2024-7-22 08:58 Title: Grouping ip address im currently using the client grouping function, im limiting the their internet speed base and doing flow control on ip address,
the issue was, on next day when they boot their computers, their PC will be listed on "Others".
any other way to set up this?
for example:
192.168.0.50-192.168.0.60 is not allowed to do facebook
but the rest is ok to do facebook
Author: v-shaojinren@ru Time: 2024-7-22 13:18 Edited by GTAC-Ryan at 2024-7-22 16:49
Hello Jovert,
It looks llike you wish to set a custom flow control policy or a custom APP Block policy.
Here is how you can setup a custom flow control policy:
In the panel, toggle the "Custom" in the both "Type" and "Application" options. Then, you can enter the IP range this policy you want to apply to and select the application.
After entering the parameter, click "OK" to add it.
The policy will be active by default after adding it.
You can also set a APP Block policy:
In the "ADD" tab, you can enter a custom IP range that you wish the policy to be applied on and select the applications.
Click the "OK" button to add the policy.
The policy will be enable by default after being added. Author: jovert@wintoppn Time: 2024-7-24 10:30
