Title: How can I set up an automatic provider change on only one subnet to Ruijie RG-EG3250? [Print this page] Author: vitalik.zhuravl Time: 2024-8-7 03:07 Title: How can I set up an automatic provider change on only one subnet to Ruijie RG-EG3250? Edited by Vitaliy Zhuravlev at 2024-8-7 21:57
Hello everyone, I need help with this task. I need to configure the gateway so that it automatically switches the Internet connection from the main WAN port to the backup WAN port in case of a failure in the main connection. Two WAN ports and one LAN port with three VLANs (192.168.2.1, 192.168.5.1, 192.168.7.1) are connected to the gateway. The goal is to ensure that backup Internet traffic is transmitted only through the LAN interface, while the main WAN connection remains connected to VLAN networks. It is necessary to ensure that when the backup WAN is running, only the LAN network (192.168.1.1) has access to the Internet of the backup WAN, and the VLANs remain without the Internet. I will be very grateful for your help in this matter.
Author: v-saul@ruijie.c Time: 2024-8-8 01:51
Hello Mr Vitaliy,
Fro this case you can configure a PBR to specify the route of every lan and vlan. You can look into this guide for the PBR configuration on page 147 https://www.ruijienetworks.com/resources/preview/76379
