Ruijie Community

Title: Dual Gateway on Layer 3 Switch [Print this page]

Author: fresco.eugene21    Time: 2024-8-26 12:38
Title: Dual Gateway on Layer 3 Switch
It's possible to have Dual Gateway in one Layer 3 Switch
here's the model

EG105g v2 - 2 Pcs [ Soon To Upgrade either RG-NBR6215-E
or RG-EG1510XS
RG-NBS5200-24GT4XS

Author: yujiamin@ruijie    Time: 2024-8-26 12:56
Dear sir

NBR series router can support VRRP protocol to achieve backup of the default gateway. When a gateway device fails, the VRRP mechanism is able to elect a new gateway device to take up the data traffic, thus guaranteeing reliable communication in the network. You can refer to this guide to configure VRRP on NBR series router on page 207: https://www.ruijienetworks.com/resources/preview/RG-NBRSeriesRoutersWeb-basedConfigurationGuide-RGOS11-9-6-B16/



Best regards
Jenny


Author: fresco.eugene21    Time: 2024-8-26 14:55
GTAC-Jenny replied at 2024-8-26 12:56
Dear sir

NBR series router can support VRRP protocol to achieve backup of the default gateway. When ...

as temporary , its possible to use dual EG105g v2 gateway in one Manage Switch Via vlan?

Author: yujiamin@ruijie    Time: 2024-8-26 16:46
Eugene Fresco replied at 2024-8-26 14:55
as temporary , its possible to use dual EG105g v2 gateway in one Manage Switch Via vlan?

Dear sir

Sorry EG105g v2 gateway can not support VRRP currently.


Best regards
Jenny


Author: yujiamin@ruijie    Time: 2024-8-30 10:00
Eugene Fresco replied at 2024-8-26 14:55
as temporary , its possible to use dual EG105g v2 gateway in one Manage Switch Via vlan?

Sorry Reyee EG can not support VRRP, so there can not be the same vlan gateways in the network.





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2