Title: How to configure store control for Ruijie switch? [Print this page] Author: zhangqiao@ruiji Time: 2024-9-27 15:33 Title: How to configure store control for Ruijie switch? Enable the broadcast storm function of port 1 and limit the broadcast storm level to 1, that is, 1% of the port bandwidth.
Ruijie> enable
Ruijie# configure termina
Ruijie(config)# interface gigabitEthernet 1/1 ------> You can use the interface range command to set the same control policy for ports in batches.
Ruijie(config-if-Gigabit Ethernet1/1)# storm-control broadcast level 1 ------> Enable broadcast storm suppression. The level is1, that is, 1% of the port bandwidth, that is, 1% of 1G, 10M.
Ruijie(config-if-GigabitEthernet1/1)# storm-controlunicast level 1 ------> Enable unknown storm multicast storm suppression.(The switch did not learn the target MAC address of the packet and its level is1. That is 1% of the port bandwidth, that is, 1% of 1G, 10M.