Title: How to configure SNMP V2c on RG-NBS3200/3100 series switch? [Print this page] Author: zhangqiao@ruiji Time: 2024-9-27 16:27 Title: How to configure SNMP V2c on RG-NBS3200/3100 series switch? We will give an example here to illustrate how to configure SNMP v2c on the web of NBS3100/3200 switch. For example, the user only needs to monitor the information of the device and does not need to set and send it. The data information of nodes such as 1.3.6.1.2.1.1 is monitored through the third-party software using the v2c version.
1. On the global configuration interface, select the v2c version, and leave other settings as default. After the operation is complete, click Save.
2. On the view/group/group/user access control interface, click Add in the view list, fill in the view name and OID in the pop-up window and click, arnd click OK after the operation is complete.
3. Enter the view /group/group/user access control interface, click Add in the SNMPv1/v2c community name list, fill in the community name, access mode and view inthe pop-up window, and click OK after the operation is completed.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
