How to set or change my switch password - Ruijie Community

Ruijie(config)#enable password ruijie ------> set password to ruijie

notice: haven't enable password default

2. Set telnet password

Ruijie#configure ter

Ruijie(config)#line vty 0 4 ------> enter telnet password configure mode，'0 4' means allow 5 users telnet to switch at th same time

Ruijie(config-line)#login

Ruijie(config-line)#password ruijie ------> set password to ruijie

Ruijie(config-line)#exit

notice: haven't enable password default

3. Set Eweb password
   Ruijie#configure ter
   Ruijie(config)#username admin password ruijie       ------>configure eweb login password
   Ruijie(config)#username admin privilege 15          ------>configure the privilege level of web account is 15，the privilege level of web management need to be 15
   Ruijie(config)#ip http authentication local             ------>configure web login using local username and password
   Ruijie(config)#end
   Ruijie#write
   notice: default password is admin admin