Ruijie Community
Title: How to reset AP password [Print this page]
Author: GTAC-Daisy Time: 2019-3-29 10:46
Title: How to reset AP password
Edited by Daisy at 2019-3-29 11:10
I forget my AP password, how can I reset it?
Author: GTAC-Daisy Time: 2019-3-29 13:16
Fit mode
When you login in fit mode using console port ,its default password is ruijie apdebug.
Fat mode
When you login in fit mode using console port ,its default enable password is admin
when you forget your password, you can reset itrefer to the guide as blew:
I. Network Topology
II. Requirements
1. Finish reading System Management--> Console Management.
2. Login AP CLI via Console.
III. Configuration Steps
Recovering AP password (configurationfile remains)
1. Power off AP, then power up.
2. Press CTRL + C, enter CTRL mode.
3. Input CTRL+Q, enter uboot mode. Andthen input "main_config_password_clear"
4. Device will reload automatically.
3. When finish reloading, enterCLI without input password.
Note: The default timeout period is10min. Please change your password before time out.
4. Change password, and then usethe command “wr” to save your configuration.
5. save configuration
Re-login AP, execute commands "showruning-config" to check configurations.
-
-
Recover AC &Fat AP password.pdf
355.83 KB, Downloads: 848
Author: GTAC-Daisy Time: 2019-4-16 20:06
If "main_config_password_clear" don't work. You can refer to this guide to reset its password
1. Ctrl +C Ctrl +Q
2. Import ubootui and then press enter Ctrl+P
3.import 'setenv runlevel 1'
4.import 'run linux'
5.cd/data
6.cat config. text ----if the password is clear password, you can find it there directly
7.rm -rf config. text
8.reboot and then repeat step 1 and step 2
9.setenv runlevel 3
10.saveenv
11. run linux
12.delete the enable password commond
Author: Rachnamao077@gm Time: 2024-7-23 17:28
Can’t download recover
Author: wangyanjun3@rui Time: 2024-7-23 17:47
Hi sir , you can't download the firewall or you can't login the device ?
can you send your device model?
Author: Rachnamao077@gm Time: 2024-7-26 10:07
How to setup up ip static on Ruijie?
Author: linenzhi@ruijie Time: 2024-7-26 10:21
Hi, dear
May i know your model, cuz for different models the configuration page will be differernt.
For example, the configuration of NBR series is as followed
Ruijie Networks | Network Devices and Solutions Provider
Author: tahervaiworkar@ Time: 2024-7-27 18:29
How to do it with mobile
Author: tahervaiworkar@ Time: 2024-7-27 18:31
How we reset with mobile
Author: wengjialong@rui Time: 2024-7-27 18:32
The commands should be applied to AP CLI. You need to connect to AP CLI by a console cable, or use telnet or ssh. Sorry it cannot be done with mobile phones.
Jayden
| Welcome to Ruijie Community (https://community.ruijienetworks.com/) |
Powered by Discuz! X3.2 |