Title: How to configure the Hybrid port on a Ruijie switch? [Print this page] Author: zhangqiao@ruiji Time: 2024-11-14 17:38 Title: How to configure the Hybrid port on a Ruijie switch? Ruijie# configure terminal
Ruijie(config-if-GigabitEthernet 0/1)# switchporthybrid native vlan 3 ---- Native vlan is 3. If no vlan-marked data enters this interface, it will mark vlan3 for the data packet. If data with vlan 3 entersor leaves this interface, the vlan3 tag will be removed.
Ruijie(config-if-GigabitEthernet 0/1)# switchporthybrid allows vlan untagged 20-30 ----If a data tag with VLAN 20 or VLAN 30 enters or leaves this interface, the VLAN tag will be removed
Ruijie(config-if-GigabitEthernet 0/1)# end
Welcome to Ruijie Community (https://community.ruijienetworks.com/)