Title: How to Configure Open VPN Server Mode on RG-EW Routers? [Print this page] Author: zhangqiao@ruiji Time: 2024-11-15 11:36 Title: How to Configure Open VPN Server Mode on RG-EW Routers? Reyee mesh routers support server mode and client mode. In server mode, a Reyee mesh router can act as an OpenVPN server to generate credentials and verify the credentials and the pre-shared key.
Choose More > VPN > OpenVPN.
Click Enable to enable the OpenVPNfeature. Select Server for theOpenVPN Type.
Select the protocol, and enter the server address, port number and other information.
(Optional) Advanced settings. Click Expand to perform the following advanced settings. If there are no special requirements, use the default settings, as shown in the following figure.
Click Save and the device will receive andprocess the VPN request.
Once the basic configurations are completed, you can view the server tunnelinformation in the Tunnel List.
Click+Add to enter a Username and a Passwordfor authentication when the client dials in.
Enable Status and click OK.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
