Title: How to set Fat AP or AC password? [Print this page] Author: GTAC-Daisy Time: 2019-4-16 15:14 Title: How to set Fat AP or AC password? 1. Set enable password
Ruijie#configure ter
Ruijie(config)#enable password ruijie ------> set password to ruijie
Ruijie(config)#end
Ruijie#write
notice: haven't enable password default
2. Set telnet password
Ruijie#configure ter
Ruijie(config)#line vty 0 4 ------> enter telnet password configure mode，'0 4' means allow 5 users telnet to switch at th same time
Ruijie(config-line)#login
Ruijie(config-line)#password ruijie ------> set password to ruijie
Ruijie(config-line)#exit
Ruijie(config)#end
Ruijie#write
notice: haven't enable password default
3. Set Eweb password
Ruijie#configure ter
Ruijie(config)#username admin password ruijie ------>configure eweb login password
Ruijie(config)#username admin privilege 15 ------>configure the privilege level of web account is 15，the privilege level of web management need to be 15
Ruijie(config)#ip http authentication local ------>configure web login using local username and password
Ruijie(config)#end
Ruijie#write
notice: default password is admin admin
Author: Jamesos1@outloo Time: 2023-4-14 13:06
Set a password
Welcome to Ruijie Community (https://community.ruijienetworks.com/)