Title: How to configure GPSK functionality on Ruijie AC WS6008 [Print this page] Author: xiangwei.yao@ru Time: 2024-11-18 18:16 Title: How to configure GPSK functionality on Ruijie AC WS6008 For the hotel scenario, there is a typical requirement about to isolate every client according different rooms, we know that with client isolation we can reach such requirement, but since that every single STA is isolated, which can be a stumbling stone for use of service like Chromecast, or some IoT service.
The purpose of this function is to isolate clients in the network per room. 1. Introduction of GPSK
The GPSK function consists in mapping the every single password to VLAN for the same ssid: 2. Configuration step
a）Configure SSID, click Config>WLAN>Add WiFi>Add WiFi/ WLAN
Enable the PPSK option when configure the WLAN, and click Next
On next page, select LIST as below, and fill VLAN IDs whiches are mapped to different password for each room then click Finish.
b) Configure PPSK/GPSK
Click Config>WLAN>PPSK>GPSK> Generate GPSK
we can fill the infomation which maps the key(password) with VLAN for a single SSID created in the previous step
, then click Save
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
