Ruijie Community

Title: How to configure PPPoE with macc mode [Print this page]

Author: GTAC-Daisy Time: 2019-5-13 12:51
Title: How to configure PPPoE with macc mode
Edited by Daisy at 2019-5-15 12:38

(1) log into AP web page(the default ip is 192.168.110.1)
(2) Choose System Mode MACC
(3) click 'Config Wizard',change AP to nat mode, choose pppoe, import username and password.
(4) create a ssid and then finish.
Notice: this ssid will be covered by the ssid