Ruijie Community

Title: How to isolate two subnets on Reyee EG？ [Print this page]

Author: zhangqiao@ruiji Time: 2024-11-28 15:16
Title: How to isolate two subnets on Reyee EG？
You can configure the Access control on EG

The guide is as follows

Choose One-Device > Gateway > Config >Behavior > Access Control.

The access control rule list displays the created access control rules. Click Add to add an access control rule.

Tips: If you want to isolate two subnets from both sides, you need to configure bi-directional acl.

2. If the EG is in Ruijie cloud, you can also achieve subnet isolation through configuration on Ruijie cloud
The steps are as follows:

Click Network-Wide> Network Access Control

Click To configure

Drag and drop the two subnets you want to isolate into the isolation zone and click Save.

Tips: If you want to isolate two subnets from both sides, you need to configure bi-directional acl.

3. If the EG is in Ruijie cloud, you can also achieve subnet isolation through configuration on Ruijie cloud
The steps are as follows:

Click Network-Wide> Network Access Control

Click To configure

Drag and drop the two subnets you want to isolate into the isolation zone and click Save.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)