Title: How to config WISP on E5 home router？ [Print this page] Author: zhangqiao@ruiji Time: 2024-11-28 17:32 Title: How to config WISP on E5 home router？ Introduction of WISP
WISP mode is the compatibility mode of the amplifier, because sometimes in the relay of other manufacturers of equipment will be incompatible with each other because of the protocol, you can replace this mode to relay. In WISP mode, the amplifier adopts NAT forwarding mode.
Applied scenarios
The user uses a relay to connect to another router, but wants to configure the DHCP server on the E5 router.
Case of configuration
a) Requirement
The current device must support the WISP function
b) Network Topology
c) Configuration
1
）
Select the connection mode as WISP
2
）
Connect to SSID
3) Select WISP access mode.
4) Create the SSID on the current router
5) Configure the DHCP Server on the current router
d) Test Result
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
