Ruijie Community

Title: Interface configuration on RG-NBR-6215-E [Print this page]

Author: kaungkyawomg002 Time: 2024-12-3 18:43
Title: Interface configuration on RG-NBR-6215-E
Hi! I am now configuring RG-NBR6215-e. I'm trying to connect TenGigabitEthernet 0/0 to RG-NBS3200-24SFP/8T4XS with Mini-GBIC-LX-SM1310 module (1G Module). But it's not working.

Author: v-xiewenyu@ruij Time: 2024-12-3 19:27
Dear sir,
Good day
May I know which port you connect your NBS with NBR?
Both devices can support Mini-GBIC-LX-SM1310 module, but for SFP ports on NBR6215-E:
1 SFP+/SFP port (SFP+ port by default). Supports
XG-SFP-SR-MM850, XG-SFP-LR-SM1310, XG-SFP-ER-SM1550 and BiDi modules. The port is a LAN port by default and support WAN/LAN switchover. It can be also used as an SPF port, supporting 1000BASE-SX/LX/ZX mini GBIC and GE-SFP-LX20/LH40-BIDI modules.
1 SPF port. Supports 1000BASE-SX/LX/ZX mini GBIC and GE-SFP-LX20/LH40-BIDI modules. The port is a WAN port by default and supports WAN/LAN switchover.
Please make sure the port mode you connected is LAN port.
Best regards,
Lex

Author: kaungkyawomg002 Time: 2024-12-4 15:57

GTAC-Lex replied at 2024-12-3 19:27
Dear sir,
Good day
May I know which port you connect your NBS with NBR?

Dear Lex,
Thank you so much for your reply. I connect NBR and NBS with SFP+ ports with Mini-GBIC-LX-SM1310 module (1G Module). But the LEDs don't blink and the interfaces shows down.

Author: v-xiewenyu@ruij Time: 2024-12-4 18:59

Aung Kyaw replied at 2024-12-4 15:57
Dear Lex,
Thank you so much for your reply. I connect NBR and NBS with SFP+ ports with Mini-GBIC- ...

Dear sir,
Good day.
Have you checked the port mode you connected? Could you show me any pictures?
Best regards,
Lex

Author: kaungkyawomg002 Time: 2024-12-5 14:09

GTAC-Lex replied at 2024-12-4 18:59
Dear sir,
Good day.
Have you checked the port mode you connected? Could you show me any pictures?

RG-NBR6215-E PORT 8F connected to RG-NBS3200-24SFP/8GT4XS port 26F

Welcome to Ruijie Community (https://community.ruijienetworks.com/)