Title: How to configure Attack Protection on Ruijie AP? [Print this page] Author: zhangqiao@ruiji Time: 2024-12-30 17:32 Title: How to configure Attack Protection on Ruijie AP? Some malicious attacks are always found in the network environment. These attacks may bring about an extremely heavy burden for the switch, resulting in the switch using an excessive amount of CPU power and giving rise to a potential operational failure.
Choose Config > Security >Attack Protection
1) ARP-guard: Enables ARP-guard configuration. Click the ARP-guard Listlink to view the host where ARP attack is detected.
2) IP-guard: Enables IP-guard configuration. Click the IP-guard Listlink to view the host where IP scanning is detected.
3) ICMP-guard: Enables ICMP-guardconfiguration. Click the ICMP-guard Listlink to view the host where an ICMP attack is detected.
4) DHCP-guard: Enables DHCP-guardconfiguration. Click the DHCP-guard Listlink to view the host where a DHCPv4 attack is detected.
5) DHCPv6-guard: Enables DHCPv6-guardconfiguration. Click the DHCPv6-guardList link to view the host where a DHCPv6 attack is detected.
6) ND-guard: Enables ND-guard configuration.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
