Ruijie Community

Title: Nbr6215-nbs 3200 sfp [Print this page]

Author: Sufyan.geidea@g Time: 2025-1-8 11:34
Title: Nbr6215-nbs 3200 sfp
I am facing problems on nbs3200 its facing very defeult to make its sfp port online to other ruijie normal giabit switch from nbr6215 to nbs 3200 is working ok but from nbs3200 can't get internet or ip to other switch

Author: v-xiewenyu@ruij Time: 2025-1-8 13:29
Dear sir,
Good day.
You are saying:
The SFP port of NBS works fine after connecting to NBR, but it does not work after connecting to other switches, right?
Have you checked the status of the optical port of the switch after the connection? If it works fine on our equipment, then it may be incompatible with the equipment of other manufacturers. You can check whether there is light coming out of the optical fiber.
Best reagards,
Lex

Author: Sufyan.geidea@g Time: 2025-1-8 13:36

GTAC-Lex replied at 2025-1-8 13:29
Dear sir,
Good day.
You are saying:

Both side is ruijie switch and light is not blinking

Author: v-xiewenyu@ruij Time: 2025-1-14 11:21

Sufyan Aslam replied at 2025-1-8 13:36
Both side is ruijie switch and light is not blinking

Dear sir,
Sorry for the late reply.
Have you replaced the optical module and optical fiber? In this case, we need to use the replacement method to locate the problem:
When wiring, first check the interface status of the device to see if the device can obtain the information of the optical module. If it cannot be obtained, then:
1. Replace the optical fiber module to confirm whether it is a problem with the optical fiber module
2. Replace the optical fiber to confirm whether it is a problem with the optical fiber jumper
3. Replace the switch/NBR interface to test whether the device interface hardware is faulty
Best regards,
Lex

Welcome to Ruijie Community (https://community.ruijienetworks.com/)