Starlink to Switch to Access Points

Good day everyone, i'm planning to have starlink with its latest gen 3 router as my main isp for a boarding house that have 8 rooms with 4 rooms on each floor. My idea is to have the RG-ES205GC-P switch and 4 of RG-RAP2200E AP for every 2 rooms for best control over bandwidth and monitoring. Is it possible and do i need to bypass the starlink router at all?

hi，sir
good day

could you tell me the size of each of  rooms so that we can make a more accurate judgment

best regards
Alan

1 mothe card free

GTAC-Alan replied at 2025-2-27 21:56
hi，sir
good day

for each room it's 3,5 x 4 meter, and hallway from door to door 1.5 meter

i think we need to scratch the idea above because the owner does not like the idea of 4 AP for 2 rooms. Instead his idea is (if ruijie has it) a 7 port hub cloud managed switch, 1 for the uplink, 4 to routers (set to ap) for each rooms, 1 for bandwidth to a second hub to the first floor, 1 maybe a router or an AP for 2 CCTV wifi connection. so for the first floor hub will be a 7 port, 1 to receive uplink from the first hub on the second floor, 4 routers to room, 1 for 2 cctv and the last port for a public wifi

Ricky Koh replied at 2025-3-2 14:14
for each room it's 3,5 x 4 meter, and hallway from door to door 1.5 meter

i think we need to scra ...

hi, sir.

good day

You can contact us for advice on the solution, here is his email:
asrar@ruijie.com.cn

best regards
Alan