Channel usage
|
Hi In access point in RF1 give me overload .. How solve this problem? |
|
Dear customer, If the 2.4Ghz of your AP is overloaded, you can configure another channel for it. After the configuration, you can wait for around 15 minutes for RF data to update.  If you have multiple APs in your environment, you may need to optimize their channel according to their deployment. The channels can be optimized by selecting different channels for the neighboring APs so they have less interference with each other. For example, the channel of 2.4Ghz can be nested in the following pattern according to the location by choosing from channel 1, 6, 11.  For 5Ghz, it can be configured in a similar pattern by choosing from channel 149, 153, 157, 161, 165, 36, 40, 44, 48, 52, 56, 60, 64. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
