How to disable Ruijie AP LED?

How to close the LED indicator of the AP?

(1)  Define a schedule session.

Ruijie(config)#schedule session 1

Ruijie(config)#schedule session 1 time-range 1 period Sun to Sat time 12:00 to 11:59

Ruijie(config)#schedule session 1 time-range 2 period Sun to Sat time 11:59 to 12:00

(2) Apply the schedule session on the AP

If fit mode:

AC(config)#ap-config ap-name

AC(config-ap)#quiet-mode session 1

If MACC or Fat mode:

AP(config)#quiet-mode session 1

Great! Thank you
I can do it  fall guys

This will turn ALL AP's indicator LEDs ON/OFF? Is there anyway to turn only some AP's LED off (for some rooms) but leave the rest on?
Also is there a way to just turn off the LED if its green (normal operation-no alarm scenario) can it still show error indicators if there is a problem? just checking

User 36800 replied at 2023-7-10 13:27
This will turn ALL AP's indicator LEDs ON/OFF? Is there anyway to turn only some AP's LED off (for s ...

Dear sir/ma'am,

The commands above are used to turn a single AP's LED off.
If AP in fit mode, you can enter the commands on AC and you can enter the command AC(config)#ap-config ap-name to configure the specific AP based on its hostname.
If AP in fat mode, you can enter the command AP(config)#quiet-mode session 1 on the device CLI to turn its LED off.

Unfortunately we cannot configure the AP to turn off LED based on its status.

Best regards,
Jayden

GTAC-Jayden replied at 2023-7-10 13:37
Dear sir/ma'am,

The commands above are used to turn a single AP's LED off.

ok no problem. I just checking its capability. I'll just turn it off and monitor via the control panel (or app alerts) if anything goes wrong. no issue.
just checking through the phone app i can only turn ALL APs LED ON/OFF? i don't see an option to do individual.
I need to use the above method if i want to do individual?

Ilm using Ruijie RG-RAP2260 (G) Reyee Cloud managed

User 36800 replied at 2023-7-10 13:51
GTAC-Jayden replied at 2023-7-10 13:37
Dear sir/ma'am,

Dear sir/ma'am,

Please kindly note the AP Indicator Light function on Ruijie Reyee App is to control the LED status of wireless devices on the SON network and it applies to all the Reyee APs in the project.
The commands in this post are to be entered on Ruijie Enterprise APs CLI to turn their LED off.

Best regards,
Jayden

GTAC-Jayden replied at 2023-7-10 14:03
Dear sir/ma'am,

Please kindly note the AP Indicator Light function on Ruijie Reyee App is to cont ...

Okay, so these same commands cannot be applied to Reyee APs? I saw that there is a [Web CLI] for my individual APs.

User 36800 replied at 2023-7-10 14:30
Okay, so these same commands cannot be applied to Reyee APs? I saw that there is a [Web CLI] for m ...

Dear sir/ma'am,

Reyee APs do not support CLI to input commands, but the Web CLI can be used to display the configuration currently running on the AP in command line format.

Best regards
Jayden

Dear Team,

Could you please advice how to disable LED of the APs in macc mode?

Thanks.