how to configure openvpn?

Reyee EG model support OpenVPN: EG105G V2, EG210 series with latest firmware version.
Below steps will show you how to configuration OpenVPN on Reyee EG.
1. Steps 1: Login in to EG => VPN menu => OpenVPN.

2. Steps 2: Enable OpenVPN and select/ input VPN information to below fields.
+ VPN type (Server/Client) based on your needed
+ Server Mode - 3 authentications method supported: Account, Certificate, Account & Certificate
- Account mode: you have to create account at VPN => VPN Clients
- Certificate: VPN connection will use certificate to auth.
- Account & Certificate: use both methods
+ Protocol: TCP or UDP
+ Server Address: IP/domain (your WAN ip address) or your domain name.
+ Port ID: 1194 by default.
+ IP Range: the IP will assign to client device.
+ Deliver Route: based on your network, you can add more than one route.
Advanced configuration:
- TLS authentication: to secure your VPN connection with TLS key
- Allow Data Compression: Yes by default.
- Route All Traffic over VPN: No by default.
- Ciper: Allow you to chose data encryption algorithms, by default will be AES-128-CBC
- Deliver DNS: will assign DNS address to client device.
- Auth: SHA1 by default.

3. Steps 3: Save configuration by click to Save button and Export Client Config/ Server log

4. Steps 4: Download and install OpenVPN application to your PC
- You can download OpenVPN client in this link (select suitable version for your PC): https://openvpn.net/community-downloads/

5. Steps 5: Import Client config to OpenVPN client after installed on your PC.
- Extract Client that you downloaded before then you will get etc folder with client.ovpn file
- Right click to OpenVPN icon on try system and chose Import => Import file... => browse to the location client.ovpn extracted.


File Imprted successfully then you can connect to VPN

6. Final steps: Right clict to OpenVPN icon on try system then select connect, if you using Account authentication method then you have to input your vpn account at this step.


Connection success and able to access to HQ resource.

How to bind OpenVPN Client to specific SID?

John Doe replied at 2023-7-9 10:24
How to bind OpenVPN Client to specific SID?

Dear John,

Could you please provide more details about SID in OpenVPN?
You may refer to a more complete configuration guide on OpenVPN on page 298 of this configuration guide:
https://www.ruijienetworks.com/resources/preview/ruijie-reyee-rg-eg-series-routers-web-based-configuration-guide-release-reyeeos/




Best regards,
Jayden