How can I make snmp or ssh connection to NBS3200-24GT4XS-P switch ?

I could not find the ssh or snmp connection settings in the web interface. Can you help?

Dear sir,
Sorry for that RG-NBS3200-24GT4XS-P doesn't support the configurations of SNMP and SSH.


Best regards,

Patrick

Connect to the web interface of the device. You can find the SNMP settings where you can see in the picture.

yakup taskent replied at 2025-1-27 16:45
Connect to the web interface of the device. You can find the SNMP settings where you can see in the  ...

Hello,

You're right. Some NBS models with new version can support it now.

Best regards,
Micca

GTAC-Micca replied at 2025-1-27 18:05
Hello,

You're right. Some NBS models with new version can support it now.

Hi,
We are considering the use of the NBS3100 and NBS3200 in some of our projects and need to know:
1. Is SSH CLI available/possible using the latest firmware versions?
2. Is only Telnet CLI available?

3. Does the SNMP agent supports all relevant and industry standard MIB so we can fully monitor (not configure...) the entire functionality? Ports/interfaces, MAC Addresses, VLANs, PoE, LLDP etc.

IofSC replied at 2025-3-2 16:37
Hi,
We are considering the use of the NBS3100 and NBS3200 in some of our projects and need to know ...

Dear customer,
The NBS series does not support SSH or TELNET connection. It can only be configured via its web interface.



This series supports SNMP.  You can refer to the SNMP template via the link below.


https://reyee.ruijie.com/en-global/resources/preview/reyee-mib/