Topology Requirement Capture the packet between switch and AP Steps 1. Download and install Wireshark on the computer for packets capturing, and connect PC to Reyee switch's port 2. https://www.wireshark.org/ 2. Configure port mirror on switch, so that PC can capture the packet of port 9. For ES series switches, you can click Switch Settings > Port Mirroring, select the source port, direction(Input/Output/All), mirror port for port mirroring configuration and click Save.You can change the port based on your situation.  For NBS series switches, you can select Switches> Ports > Port Mirroring > Edit. In the displayed dialog box, set the source port, destination port, and monitoring type, and click OK.    Note: A maximum of four port mirroring entries can be configured. Port mirroring cannot be configured for ports that arealready mirrored. 3. Run Wireshark, double-click the network Interface connecting to the device  4. Save the packet. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
