I want VLAN 1 go through WAN 1, VLAN 2 go through WAN 2, how can I do it? You can use the policy route to do it, for example vlan 1 is 192.168.1.0 vlan 2 is 192.168.2.0. WAN 1 is 10.100.10.1, gateway is 10.100.10.254 WAN 2 is 10.100.11.1,gateway is 10.100.11.254 Step 1 click route policy-base route, click add ACL Step 2, Add two ACL 10 and 11,set ACE to permit 192.168.1.0 and 192.168.2.0 Step 3 Configure Policy route Finished |
this is for VLAN, what about specific IP address (one client/server) only? |
The Wi-Fi Hero replied at 2023-7-20 12:48 Dear sir You can configure the ACL to match the specific IP address here and apply the ACL on different PBR rules. Best regards Jenny |
GTAC-Jenny replied at 2023-7-20 13:23 do i have to enable default route for both WAN? |
The Wi-Fi Hero replied at 2023-7-21 09:44 Dear sir Yes, the default route will be added by default when you set the port to WAN port to make sure the user internet access. You can type this command: show ip route to check the EG routing. Best regards Jenny |
hello how about 3 ISP i want this vlan10 go only ISP 1 but vlan 20 go only ISP 2 and ISP 3 |
Will the Extended ACL work with PBR also? For example, when the Destination port is UDP 443, the Route to wan1 when the Source port is UDP 53, the Route to wan2 |
Hello, can you show some configuration if there is more than 2 WAN.. example : VLAN 20 and 30 via WAN 1 , WAN 2 , WAN 3 ( Load balanced ) and VLAN 40 via WAN 4 and WAN 5 ( load balanced ) is this possible? |
XjawZx replied at 2024-9-24 21:07 Dear Sir, Good day. To configure PBR on ruijie EG, you may check this configuration guide: https://www.ruijienetworks.com/resources/preview/ruijie-reyee-rg-eg-series-gateways-web-based-configuration-guide-B16/ Best regards, Lex |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd