How to configure guest WiFi for Ruijie AP on Ruijie Cloud?

a) Create a guest SSID and set the forward mode as NAT.


Notice:
The IP address of  default address pool is 192.168.23.0/24
You can click NAT Address Pool Configuration to change the NAT Address Pool :





After changing the configuration, you need to click Save.






b) Set ACL to block guest users accessing to the intranet resource on CLi of Ruijie AP.

Command:
The ACL configuration example:
Guest vlan: vlan 233 192.168.7.0/24
Intranet resource vlan: vlan 6, 192.168.6.0/24

Ruijie#con ter
Ruijie(config)#ip access-list extended 107
Ruijie(config-ext-nacl)#10 deny ip 192.168.7.0 0.0.0.255 192.168.6.0 0.0.0.255
Ruijie(config-ext-nacl)#20 permit ip any any
Ruijie(config-ext-nacl)#exit
Ruijie(config)#interface BVI 233
Ruijie(config-if-BVI 10)#ip access-group 107 in
Ruijie(config-if-BVI 10)#end
Ruijie#wr

c) Validation results

on latest cloud version, seems like i cant add see my ssid in captive portal page if i set it to nat forwarding mode
it is working on the older version (2022). is this a bug ?

Narendra Wijayanto replied at 2024-1-14 03:01
on latest cloud version, seems like i cant add see my ssid in captive portal page if i set it to nat ...

Hi:

Let us check on our side and as soon as we have news about the issue you reported, I will let you know.

Thank you.

Regards,

Javier