|
1 Fault Symptom The wireless user fails to perform 802.1x authentication. 2 Possible causes of the fault 1) The AC and AP versions are inconsistent 2) The route fails 3) The AC and server key are incorrectly configured 4) The terminal Settings are incorrect 5) The compatibility component is not enabled on the server 6) The route between the terminal and the server is abnormal 7) The server does not support wireless 802.1x authentication 3 Troubleshooting process 1. Check whether the AC version is the same as the AP version 2. Check whether the AC is reachable to the server 3. Check whether the AC and server key are correctly configured 4. Confirm the terminal Settings 5. Check whether compatibility components are enabled on the server 6. Check whether the terminal and server are reachable 7. Check whether the server supports 802.1x authentication 8. Collect the information and contact technical support |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
