SFP RG-2910-24GT4XS-SFP RG-NBS3100

How to configure the SFP port so that it can be read from the RG-S2910-24 port to RG-NBS3100-8port Switch, does anyone know the configuration? Please help me.

Thanks

Can you describe your problem more clearly? What are your current problems?


If you need to configure the port, you can refer to this picture:

GTAC-Micca replied at 2023-10-6 20:27
Can you describe your problem more clearly? What are your current problems?

May i ask, what are the compatible SFP manufacturers with Reyee devices? Only reyee sfp-s can be used? thanks!

Szabi replied at 2024-2-10 20:11
May i ask, what are the compatible SFP manufacturers with Reyee devices? Only reyee sfp-s can be u ...

I'm sorry, at present, we only test ruijie devices and ruijie SFP modules, not test other vendors‘. Therefore, we cannot guarantee the compatibility of this. You can test it yourself.

GTAC-Micca replied at 2024-2-10 20:17
I'm sorry, at present, we only test ruijie devices and ruijie SFP modules, not test other vendors ...

Dear Micca,

Thanks for your fast reply! so if i'm understand good, Reyee not limited the vendor of the SFP, but of course, you cannot guarantee the working. If i insert any other vendor sfp (tested with juniper, cisco, huawei, gigalight) module, i should see this module active at "Optical Module Info" menu?

Szabi replied at 2024-2-10 20:26
Dear Micca,

Thanks for your fast reply!  so if i'm understand good, Reyee not limited the vendo ...

Yes, you're right.

GTAC-Micca replied at 2024-2-10 20:48
Yes, you're right.

For answer myself, i tested cisco, huawei, juniper, linkeasy, gigalight 1g and 10g modules, non of them were identified by the device. Only one cooper sfp worked, Gigalight GE-GB-P1RC-ETB.

Szabi replied at 2024-2-22 19:46
For answer myself, i tested cisco, huawei, juniper, linkeasy, gigalight 1g and 10g modules, non of ...

Hi sir,

Yes,Optical modules from other manufacturers are not guaranteed to work properly on our devices, sorry for the inconvenience.


Best regards,
Steve