Reyee AP mesh feature

I use an rg-rap6062G access point and I want to add several rg-rap6262 access points using wireless
Is it possible to add 8 rg-rap6262 APs using the MESH feature?
for example rg-rap6062G becomes the main AP then at point A the rg-rap6262 connects to the main AP using wireless with a distance of 100 meters then at point B the rg-rap6262 connects using wireless to point A with a distance of 100 meters then at point C the rg-rap6262 connects using wireless to point B with a distance of 100 meters then at point D the rg-rap6262 connects using wireless to point C with a distance of 100 meters and so on to the last point
the obstacles are just a few trees and not much

Hi:

You can see the reyee mesh limitation in the following link:

https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=4778


On the other hand, you can consider the distance between each AP taking into consideration the installation of them by testing the signal strength for no less than -60dbm at the edge of each device.

Regards,

Javier