Trunk Ports in EG105g v2

Can possible have trunk ports in EG105G v2 ?

Example i would like to trunk ports the lan 2 so i can have the tagging on my manage switch of NBS5200-25GT4XS

You can follow the steps below to configure it.
1.Add a VLAN ID and IP segment



2.Add vlan settings on the port.


For more configuration details, please refer to the configuration document
https://reyee.ruijie.com/en-global/support/documents/slide_rg-eg-series-routers-configuration-guide/

GTAC-Tom replied at 2024-8-27 11:34
You can follow the steps below to configure it.
1.Add a VLAN ID and IP segment

Hello it allow only 1 vlan per ip segment , i would like to add more like this one

in lan port 2 of Ruijie EG105g v2 i would like to add Vlan 21,22,23,24,25 in that specific LAN port so i can tagged it on LAN 0 to pass it on my MAnage switch

Eugene Fresco replied at 2024-8-27 12:37
Hello it allow only 1 vlan per ip segment , i would like to add more like this one

in lan port 2  ...

Hello dear
You can add more vlans in LAN setting page just like followed:

And then turn to the Port VLAN page to tag the LAN0 with more vlans, just like followed:


Best regards
Sean

GTAC-Sean replied at 2024-8-27 22:05
Hello dear
You can add more vlans in LAN setting page just like followed:

Hello Sean , But it's limited only 16 vlan i need 32 more

Eugene Fresco replied at 2024-8-28 14:46
Hello Sean , But it's limited only 16 vlan i need 32 more

Dear sir

unforunately, this is the limitaion of the device that it can only support up to 16 VLANs

GTAC-Ross replied at 2024-8-28 14:53
Dear sir

unforunately, this is the limitaion of the device that it can only support up to 16 VLAN ...

What Device Support More than 16 Vlans Can you give me the link