|
We will give an example here to illustrate how to configure SNMP v2c on the web of NBS3100/3200 switch. For example, the user only needs to monitor the information of the device and does not need to set and send it. The data information of nodes such as 1.3.6.1.2.1.1 is monitored through the third-party software using the v2c version. 1. On the global configuration interface, select the v2c version, and leave other settings as default. After the operation is complete, click Save.  2. On the view/group/group/user access control interface, click Add in the view list, fill in the view name and OID in the pop-up window and click, arnd click OK after the operation is complete.    3. Enter the view /group/group/user access control interface, click Add in the SNMPv1/v2c community name list, fill in the community name, access mode and view inthe pop-up window, and click OK after the operation is completed.   |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 6
