Howto configure WiFiDog Authentication on AC?

Choose Config > Authentication > WiFiDog Auth.

Unauthenticated users can be redirected to the authentication page for authentication. Click More to access the WiFiDog Auth Server List page.

(1) Add a WiFiDog authentication server: Click Add Authentication Server. Configure the ACL information in the pop-up dialog box. Click OK. A message indicating the configuration has been saved is displayed. The newly added server is displayed in the server list.

Parameter	Description
Portal Server IP	Indicates the IP address of a portal server.
Redirection URL	Indicates the portal server URL for  authentication.
NAS IP	Specifies the IP address of a device to be  managed by WiFiDog, which is used for communication from the server.
Redirection Mode	Specifies HTTP redirection or JavaScript  redirection. JavaScript redirection is employed by default.
Gateway ID	Specifies the ID of a gateway used by WiFiDog,  which is the gateway SN by default.
SSID	Specifies a Wi-Fi network to be configured with  WiFiDog authentication.

(2) Delete a WiFiDog authentication server: Click Delete behind a specified authentication server. The confirmation dialog box pops up. Click OK to finish the operation.

(3) Edit a WiFiDog authentication server: Click Edit. Configure the information in the pop-up dialog box. Click OK. A message indicating the configuration has been saved is displayed. The modified server is displayed in the server list.

What does could be setup as a NAS? A Virtual machine?

Sohail Asghar replied at 2024-11-21 17:32
What does could be setup as a NAS? A Virtual machine?

NAS stands for network-attached storage, which is a storage device attached to a network. It is composed of hardware (including storage media, processor, memory, network interface) and software (operating system and service software), which can provide data storage services for clients in the network.