Dose Router EW3000Gx PRO support Folow & APP Control

Dear ALL
I went to apply some control on application with device user
so i have router model: EW3000Gx PRO when go to  senireo >Folow & APP Control when press i get pop up screen tell me " Not supported. reason the gateway() does not exist "
how can solved this issue? and Does this model support this type of blocking?.....

Hello Ahmed,

Yes you can configure flow control on device but you need to do it by the eweb configuracion on device

Mobile Phone View: Choose More > Switch to PC view > More > Advanced > Flow Control > Smart Flow Control.

PC View: Choose More > Advanced > Flow Control > Smart Flow Control.

Click Enable and set the network bandwidth provided by the ISP. After the configuration is saved, the router adjusts the bandwidth of each client based on the total bandwidth to prevent any one client from occupying too much bandwidth.

Note
After flow control is enabled, speed measurement will be affected. Disable flow control if you want to do speed measurement.

Regards!

TAC-Saul replied at 2024-11-2 07:16
Hello Ahmed,

Yes you can configure flow control on device but you need to do it by the eweb config ...

Hello




TAC-Saul,

kindly, thank your for your explain to me the steps, but this is not i went to ,
as i mention i need to block the application such as facebook , instgram , massenger...ect
i see from flow control you can block on application leve foir that reason i buy this model
also, after i enable the smart trifice control , i found only add ip of device ,It doesn't make sense to add all the devices.
For your information, when you return to the application after activating Smart Traffic Control, the previous warning message regarding getway dose not exist still appears.